Okay, so I previously covered the creation of the tail lights for the trike, so now I am going to cover the headlights. The circuit is the same, but the white LEDs have different voltage and current requirements so they will need different resistors. So I'll begin with a parts list:
It's the same idea as before, only the white LEDs are shaped differently because they have their own heatsink that they are mounted on. The two bullet lights are going to be smaller side lamps, while a large bullet headlight is going to be the main headlight.
I am reposting the circuit diagram here for reference:
So to begin with, I gave the white LEDs a test to check their brightness. Here's a photo of the test:
I soldered wires to the LEDs:
Then I mounted the LEDs in the white bullet lights:
I also used the larger white bullet light which is to be the main headlight:
Here it is opened up. I removed the light bulb but did not bother removing the battery case, as it was riveted in place and would have been very difficult to remove without damaging anything:
Then all that remained was to mount the lights. I mounted the headlight on the front derailler bar:
Here's a good photo of the white LED in the front lamp:
I mounted the rear bullet lights using some of the premade mounting holes on the trike frame. Also visible are the wire crimps I used to connect up the whole trike. I am going to put black heat-shrink tubing over the crimps so they're not quite so visible:
The large rear lamp was mounted to the rear fender. I drilled a 1/4" hole, and the light included all the mounting hardware:
Here is a couple of photos of all the tail lights together:
And finally, a view of the front bullet lights. The fender mounts had these cool little mount points that ended up being perfect for the lights:
Finally, all the wires (made of black 20 gauge lamp wire held in place by black zip ties) were run to a bag strapped behind the seat. The bag is just the right size to hold the electronics box:
And there you go! The lights are bright as heck! I calculated the batteries as lasting around 2.5 hours, but we haven't tested the system to that limit yet, as we generally recharge the batteries after every ride anyway.
Thursday, March 26, 2009
Friday, March 20, 2009
Hours of staring online at bicycles and the art of making them until my eyes cease to function has taught me no one makes a more beautiful bike than Columbine Bicycle Works. I enjoy staring at beautiful triumphs of the craftsmanship of Man, so if you believe my assumption to be false by all means show me beautiful bicycles.
But Columbine doesn't just produce eye candy, form follows function as they are glad to point out and their bicycles prove it with world class artifice.
Tuesday, March 10, 2009
The fine folks at the Morgan Motor Company, makers of beautiful British three-wheeled automobiles, celebrated their hundredth anniversary with a two-thirds scale kiddie version that is pedal powered. Thus created the most awesome tadpole trike in the world.
Morgan Pedal Car
Morgan Pedal Car